How to Solve Laptop Problem: Replacing Your Laptop Screen

How to Solve Laptop Problem: Replacing Your Laptop Screen


If your image problem due to a faulty computer screen, replacing it is relatively easy. It should be noted that laptop screens are very expensive and can sometimes cost 50% or more of the total price of the computer, for example, more than $ 500 for a $ 1,000 computer. While you can buy a new monitor of computer manufacturer, most people either choose to buy a computer screen or used to buy a new computer. For those who decide to replace their computer screen, is the only tool you'll need a screwdriver, a few easy steps.

Step 1: First note the type of the screen of your laptop and buy one that is guaranteed to fit. While some laptops model of manufacturing same may be true that he should go before purchasing. When you're ready to replace the screen, turn off your computer, remove the battery and unplug it.

Step 2: Locate the screw covers on the plastic frame (usually rubber or plastic) to access the screws of the screen bezel for timing. In most cases, your screen is 4 to 6 in all the screw covers. You'll probably have a small flat head or Phillips screwdriver, though some laptops may have their own screw heads that require special screwdriver or Allen key to remove the screws. Unscrew the cover is usually at the bottom of the plastic frame, but each computer model is different, you should seek cover screws to access the screen.

Step 3: After removing the screw covers, remove all screws securing the screen in place. Once all screws are removed, gently pull the screen away from the plastic ring. Usually the best way to do this is to use your fingers to gently roll around the ring comes off the screen. When you run your fingers around the ring a few separate screen, pull the screen away from the ring using a mild to moderate force. If the screen is still not moving, check whether there are other screws still attached.

Step 4: Now the frame is removed, you should see a box around the metal frame. At this stage, you can tilt the screen forward, exposing the metal behind the LCD frame. The display should pop softly on the back. You should be able to see the wires running through a laptop display. Should be two wires, the first is a string, which is a video cable. The video cable is usually recorded in its place. Remove the tape and then carefully remove the tape on the LCD screen. Other cable is the power cord from the inverter. In most cases, if you're just replacing the LCD screen, you can still use the drive, in which case it is. However, if you are replacing the drive a lot, unplug the power cord and disconnect the drive to install.

Step 5: Once your old screen was removed, the connection of the new screen and put in the tank. However, before settling on the glass, you should test the screen to make sure it works properly. To test the screen, have the power to your computer. When turning on the computer, the display is working properly, you can turn off the computer and live in the screen bezel and screw lid with plastic caps or rubber.

Replacing the laptop screen is completed. Your computer running like new. Replacing the screen on your laptop on your own is a great way to save money not only on the cost of the laptop screen, but labor costs as well.



thank www.tech-faq.com/